Steering Lock System: Initialization

HINT:

In vehicles equipped with the smart key system, the starting function may not operate after recharging or while jump-starting a discharged battery. This condition is most common if the battery voltage drops below 9 V. The following procedure has been developed to address this condition.

1. INITIALIZATION PROCEDURE 
   1. Confirm that the SHORT fuse is installed.

      HINT:

      If the SHORT fuse is not installed, install it at this time.

      Fig 1: Identifying SHORT Fuse

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Move the shift lever to the N position.
   3. Turn the engine switch off.
   4. Open the driver's door.

      HINT:

      Opening the driver's door will start an initialization process between the steering lock ECU and the engine room junction block.

   5. Depress the brake pedal.
   6. Press the "START STOP" switch.