Service Data
SERVICE DATA SPECIFICATION (3MZ-FE ENGINE CONTROL SYSTEM)
| Camshaft timing oil control valve assembly | 1-2 | 6.9 to 7.9 Ω at 20°C (68°F) |
| Throttle body | 2 (M+) -1 (M-) | 0.3 to 100 Ω at 20°C (68°F) |
| Mass air flow meter | Standard Condition | Below 0.69 g/s |
| VVT SENSOR | 1-2 | 835 to 1400 Ω at -10 to 50°C (14 to 122°F) 1060 to 1645 Ω at 50 to 100°C (122 to 212°F) |
| Crankshaft position sensor | 1-2 | 1630 to 2740 Ω at -10 to 50°C (14 to 122°F) 2065 to 3225 Ω at 50 to 100°C (122 to 212°F) |
| Engine coolant temperature sensor | 1-2 | 2.32 to 2.59 kΩ at approx. 20°C (68°F) 0.310 to 0.326 kΩ at approx. 80°C (176°F) |
| Knock control sensor | 1-2 | 120 to 280 kΩ at 20°C (68°F) |
| Air fuel ratio sensor (for Bank 1) | 1 (HA1A) - 2 (+B) | 1.8 to 3.4 Ω at 20°C (68°F) |
| 1 (HA1A) - 4 (A1A-) | 10 kΩ or higher (always) | |
| Air fuel ratio sensor (for Bank 2) | 1 (HA2A) - 2 (+B) | 1.8 to 3.4 Ω at 20°C (68°F) |
| 1 (HA2A) - 4 (A2A-) | 10 kΩ or higher (always) | |
| Heated oxygen sensor (for Bank 1) | 2 (HT1B)-1 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 2 (HT1B) - 3 (E2) | 10 kΩ or higher (always) | |
| Heated oxygen sensor (for Bank 2) | 1 (HT2B) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 1 (HT2B) - 4 (E2) | 10 kΩ or higher (always) | |
| Integration relay (C/OPN relay) | (2E-13) - (2E-6) | 10 kΩ or higher (No battery voltage applied) |
| (2E-13) - (2E-6) | Below 1 Ω (Battery voltage applied to terminals 2E-6 and 2D-12) | |
| Integration relay (A/F relay) | (2A-4) - (2C-1) | 10 kΩ or higher (No battery voltage applied) |
| (2A-4) - (2C-1) | Below 1 Ω (Battery voltage applied to terminals 2E-10 and 2E-6) | |
| Ignition relay No. 1 | 3-5 | 10 kΩ or higher (No battery voltage applied) |
| 3-5 | Below 1 Ω (Battery voltage applied to terminals 1 and 2) | |
| Ignition relay No. 2 | 3-5 | 10 kΩ or higher (No battery voltage applied) |
| 3-5 | Below 1 Ω (Battery voltage applied to terminals 1 and 2) |