LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (3MZ-FE) Service Specifications (Hybrid) >> 3MZ-FE Engine Control System >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Camshaft timing oil control valve assembly (for Bank 1) X Cylinder head 8.0 82 71 in.*lbf
Camshaft timing oil control valve assembly (for Bank 2) X Cylinder head 8.0 82 71 in.*lbf
Throttle body assembly X Intake air surge tank 11 112 8
VVT sensor (for Bank 1) X Cylinder head 8.0 82 71 in.*lbf
VVT sensor (for Bank 2) X Cylinder head 8.0 82 71 in.*lbf
Crankshaft position sensor X Oil pump assembly 8.0 82 71 in.*lbf
Engine coolant temperature sensor X Outlet water 20 204 15
Knock sensor X Cylinder block sub-assembly 20 199 15
Intake manifold X Cylinder block sub-assembly 15 153 11
Outlet water X Cylinder head 15 153 11
Ground cable X Cylinder head 8.4 86 74 in.*lbf
Air fuel ratio sensor X Exhaust manifold sub-assembly LH with out SST 44 449 33
with SST 40 408 30
Air fuel ratio sensor X Exhaust manifold sub-assembly RH with out SST 44 449 33
with SST 40 408 30
Oxygen sensor X Front No. 3 exhaust pipe sub-assembly with out SST 44 449 33
with SST 40 408 30
Oxygen sensor X Front exhaust pipe sub-assembly. with out SST 44 449 33
with SST 40 408 30