LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, On-Vehicle Inspection, Removal & Installation >> Camshaft Oil Control Valve >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Oil Control Valve: Installation

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Exhaust Side of Bank 1) 
    1. Install a new O-ring to the oil control valve.
    2. Apply a light coat of engine oil to the O-ring.
    3. Install the oil control valve with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
        Fig 1: Locating Bolt And Oil Control Valve (Exhaust Side Of Bank 1)
        G05628214Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the oil control valve connector.
  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Intake Side of Bank 1) 
    1. Install a new O-ring to the oil control valve.
    2. Apply a light coat of engine oil to the O-ring.
    3. Install the oil control valve with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
        Fig 2: Locating Bolt And Oil Control Valve (Intake Side Of Bank 1)
        G05628215Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the oil control valve connector.
  3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Intake Side of Bank 2) 
    1. Install a new O-ring to the oil control valve.
    2. Apply a light coat of engine oil to the O-ring.
    3. Install the oil control valve with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 3: Locating Bolt And Oil Control Valve (Intake Side Of Bank 2)
      G05628216Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
    4. Connect the oil control valve connector.
  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (Exhaust Side of Bank 2) 
    1. Install a new O-ring to the oil control valve.
    2. Apply a light coat of engine oil to the O-ring.
    3. Install the oil control valve with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 4: Locating Bolt And Oil Control Valve (Exhaust Side Of Bank 2)
      G05628217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
    4. Connect the oil control valve connector.
  5. INSTALL AIR CLEANER HOSE ASSEMBLY  (See INSTALLATION )
  6. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals