DTC P2102 Throttle Actuator Control Motor Circuit Low; DTC P2103 Throttle Actuator Control Motor Circuit High: Description

The throttle actuator is operated by the ECM and opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the Throttle Position (TP) sensor, which is mounted on the throttle body assembly. The TP sensor provides feedback to the ECM. This feedback allows the ECM to appropriately control the throttle actuator and monitor the throttle opening angle as the ECM responds to driver inputs.

HINT:

This ETCS (Electronic Throttle Control System) does not use a throttle cable.

DTC DETECTION CONDITIONS AND TROUBLE AREA REFERENCE

DTC No.	DTC Detection Conditions	Trouble Areas
P2102	Conditions (a) and (b) continue for 2.0 seconds (1 trip detection logic): Throttle actuator duty ratio 80% or more Throttle actuator current 0.5 A or less	Open in throttle actuator circuit Throttle actuator ECM
P2103	Either of following conditions met: Hybrid IC diagnosis signal fail Hybrid IC current limiter port fail	Short in throttle actuator circuit Throttle actuator Throttle valve Throttle body assembly ECM