DTC P0115 Engine Coolant Temperature Circuit; DTC P0117 Engine Coolant Temperature Circuit Low Input; DTC P0118 Engine Coolant Temperature Circuit High Input: Description
A thermistor is built into the Engine Coolant Temperature (ECT) sensor, of which the resistance value varies according to the ECT.
The structure of the sensor and its connection to the ECM are the same as those of the Intake Air Temperature (IAT) sensor.
HINT:
When any of DTCs P0115, P0117 and P0118 are set, the ECM enters fail-safe mode. During fail-safe mode, the ECT is estimated to be 80°C (176°F) by the ECM. Fail-safe mode continues until a pass condition is detected.
DTC DETECTION CONDITIONS AND TROUBLE AREA REFERENCE
| DTC No. | Proceed To | DTC Detection Conditions | Trouble Areas |
|---|---|---|---|
| P0115 | Step 1 | Open or short in ECT sensor circuit for 0.5 seconds (1 trip detection logic) |
|
| P0117 | Step 4 | Short in ECT sensor circuit for 0.5 seconds (1 trip detection logic) |
|
| P0118 | Step 2 | Open in ECT sensor circuit for 0.5 seconds (1 trip detection logic) |
|
HINT:
When any of these DTCs are set, check the ECT by selecting the following menu items on Techstream:
Powertrain / Engine and ECT / Data List / Coolant Temp.
DTC DETECTION CONDITIONS AND TROUBLE AREA REFERENCE
| Temperature Displayed | Malfunctions |
|---|---|
| -40°C (-40°F) | Open circuit |
| 140°C (284°F) or higher | Short circuit |