LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System (2GR-FE)) >> SFI System >> DTC P0111 Intake Air Temperature Sensor Gradient Too High >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111) 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester ON.
    4. Enter the following menus: Powertrain / Engine and ECT / Trouble Code.
    5. Read DTCs.

      Result 

      RESULT CHART

      Display (DTC Output) Proceed to
      P0111 and other DTCs A
      P0111 B

      HINT:

      If any DTCs other than P0111 are output, troubleshoot those DTCs first.

    B: REPLACE MASS AIR FLOW METER 

    A:  GO TO DTC CHART 

scientia non olet · About LEMON Manuals