Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
All:
TYPICAL ENABLING CONDITIONS CHART - ALL
| Monitor runs whenever following DTCs not present | None |
|---|---|
| Throttle actuator | ON |
| Throttle actuator duty calculation | Executing |
| Throttle position sensor | Fail determined |
| Throttle actuator current-cut operation | Not executing |
| Throttle actuator power supply | 4 V or higher |
| Throttle actuator | Fail determined |
P2111 (Throttle actuator stuck open):
P2111 (THROTTLE ACTUATOR STUCK OPEN)
| All of following conditions met | - |
|---|---|
| Throttle actuator current | 2 A or more |
| Duty cycle to close throttle | 80% or more |
P2112 (Throttle actuator stuck closed):
P2112 (THROTTLE ACTUATOR STUCK CLOSED)
| All of following conditions met | - |
|---|---|
| Throttle actuator current | 2 A or more |
| Duty cycle to open throttle | 80% or more |