LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control Systems >> Skid Control Buzzer >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Skid Control Buzzer: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  3. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  6. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Detach the clamp and remove the buzzer.
    2. Disconnect the buzzer connector.
      Fig 1: Identifying Skid Control Buzzer Assembly
      G05159875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals