LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control Systems >> VSC Off Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSC Off Switch: Installation

  1. INSTALL TRACTION CONTROL SWITCH 
    1. Engage the 2 claws to install the traction control switch.
      NOTE: Securely engage the 2 claws.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See INSTALLATION )
  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
    Fig 1: Identifying Traction Control Switch And Claws
    G05649627Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL COWL SIDE TRIM BOARD LH  (See INSTALLATION )
  6. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals