Torque Specifications
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Camshaft timing oil control valve x Cylinder head cover LH and RH | 10 | 102 | 7 | |
| Throttle body x Intake manifold | 10 | 102 | 7 | |
| Air cleaner assembly x Body | 5.5 | 56 | 49 in.*lbf | |
| ECM x Body panel | 8.0 | 82 | 71 in.*lbf | |
| Connector holder block x Body panel | 7.3 | 74 | 65 in.*lbf | |
| Accelerator pedal rod x Body panel | 5.0 | 51 | 44 in.*lbf | |
| Mass air flow meter x Air cleaner case | 1.7 | 17 | 15 in.*lbf | |
| Camshaft position sensor x Cylinder head cover LH | 10 | 102 | 7 | |
| WT sensor x Cylinder head cover LH and RH | 10 | 102 | 7 | |
| Crankshaft position sensor x No. 1 oil pan | 10 | 102 | 7 | |
| Crankshaft position sensor protector x No. 1 oil pan | 10 | 102 | 7 | |
| Engine coolant temperature sensor x Front water bypass joint | 20 | 200 | 14 | |
| Power steering oil pressure switch x Pressure feed tube | 21 | 214 | 16 | |
| Knock sensor x Cylinder block | 20 | 204 | 15 | |
| Air fuel ratio sensor (for Bank 1) x Front No. 2 exhaust pipe | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Air fuel ratio sensor (for Bank 2) x Front exhaust pipe | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Heated oxygen sensor (for Bank 1 Sensor 2) x Front No. 2 exhaust pipe | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Heated oxygen sensor (for Bank 2 Sensor 2) x Front exhaust pipe | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Ignition coil x Cylinder head cover | 10 | 102 | 7 | |
| Spark plug x Cylinder head | 21 | 214 | 16 | |