LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Sequoia Platinum, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - SFI System, Parts Location, System Diagram, Troubleshooting And Diagnosis System Introduction, Fail-Safe Chart, Diagnostic Trouble Code (DTC) Chart >> SFI System >> Precaution
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SFI System: Precaution

CAUTION: When using the Techstream, observe the following items for safety reasons:
  • Read its instruction books before using the Techstream.
  • Prevent the Techstream cable from being caught on the pedals, shift lever and steering wheel when driving with the Techstream connected to the vehicle.
  • When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One person drives the vehicle, and the other operates the Techstream.
NOTE:
  • Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components (See INSTALLATION ).
  • Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM (See INSTALLATION ).
  • Perform Dynamic Laser Cruise Control System initialization after replacing the ECM (See INITIALIZATION ).
  • Perform Reset Memory (AT initialization) for 2WD when replacing the automatic transmission assembly, engine assembly or ECM (See INITIALIZATION ).
  • Perform Reset Memory (AT initialization) for 4WD when replacing the automatic transmission assembly, engine assembly or ECM (See INITIALIZATION ).
  • Perform Registration (VIN registration) when replacing the ECM (See REGISTRATION  ).

HINT:

Reset Memory cannot be completed by only removing the battery.