LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System >> Front Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Speed Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT WHEEL 
  3. REMOVE FRONT FENDER LINER 
    1. Remove the 3 screws, 6 clips and 4 grommets and remove the front fender liner.
  4. REMOVE FRONT SPEED SENSOR 
    Fig 1: Identifying Speed Sensor Connector
    G04832244Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the speed sensor clip from the body.
    2. Disconnect the speed sensor connector.
    3. Remove the 3 clips.
    4. Remove the bolt and separate the clamp from the body.
    5. Remove the bolt and separate the clamp from the shock absorber.
    6. Remove the bolt and remove the speed sensor from the steering knuckle.
      NOTE:
      • Keep the speed sensor tip and installation portion free of foreign matter.
      • Remove the speed sensor without turning it from its original installation angle.
scientia non olet · About LEMON Manuals