Crankshaft Position Sensor: Installation

INSTALL CRANKSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to an O-ring of the crankshaft position sensor.
2. Install the crankshaft position sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 1: Identifying Crankshaft Position Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the crankshaft position sensor connector.
INSTALL COOLER COMPRESSOR ASSEMBLY
1. Install the cooler compressor assembly with the 4 bolts.
  Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
2. Connect the cooler compressor assembly connector.
3. Install the suction hose sub-assembly with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 2: Identifying Suction Hose Sub-Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE UNDER COVER ASSEMBLY REAR
1. Install the engine under cover assembly rear with the 4 bolts.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
INSTALL GENERATOR ASSEMBLY (See INSTALLATION )