LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Steering Angle Sensor: Removal

  1. PRECAUTION  (See PRECAUTION )
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL COVER LOWER NO. 3 
  5. REMOVE STEERING WHEEL COVER LOWER NO. 2 
  6. REMOVE STEERING PAD ASSEMBLY  (See REMOVAL )
  7. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  8. REMOVE STEERING COLUMN COVER LOWER  (See REMOVAL )
  9. REMOVE STEERING COLUMN COVER UPPER 
  10. REMOVE SPIRAL CABLE SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE TURN SIGNAL SWITCH ASSEMBLY  (See REMOVAL )
  12. REMOVE STEERING ANGLE SENSOR 
    1. Disconnect the steering angle sensor connector.
      Fig 1: Locating Steering Angle Sensor Connector
      G04965580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 claws, then remove the steering angle sensor.
      Fig 2: Locating Steering Angle Sensor And Claw
      G04965581Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals