LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Avalon XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Cruise Control System) >> Distance Control Ecu >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Distance Control Ecu: Removal

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: Wait for 90 seconds after disconnecting the cable to prevent the airbag working (See PRECAUTION ).
  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL FINISH PLATE  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH  (See REMOVAL )
  6. REMOVE INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER NO. 1  (See REMOVAL )
  7. REMOVE DISTANCE CONTROL ECU ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the bolt and the distance control ECU assembly.
      Fig 1: Identifying Control ECU Assembly Bolts
      G05005638Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals