LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Camry Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Initialization >> DTC P0607 Control Module Performance >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. CHECK WHETHER DTC OUTPUT RECURS (IN ADDITION TO DTC P0607) 
    1. Connect Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the tester on.
    4. Clear the DTC.
    5. Turn the power switch off.
    6. Disconnect the auxiliary battery negative terminal and wait for 1 minute.
    7. Connect the auxiliary battery negative terminal.
    8. Turn the power switch on (IG).
    9. Enter the following menus: Powertrain / Engine / Trouble Code.
    10. Read the DTCs.

    Result 

    RESULT CHART

    Display (DTC output) Proceed to
    P0607 A
    No output DTC B

    B: CHECK FOR INTERMITTENT PROBLEMS 

    A: REPLACE HYBRID VEHICLE CONTROL ECU 

scientia non olet · About LEMON Manuals