Integration Relay: Inspection

1. INSPECT INTEGRATION RELAY 
   Fig 1: Locating Integration Relay And Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   Fig 2: Integration Relay Diagram

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. EFI MAIN RELAY:
      1. Measure the resistance according to the value(s) in the table below.
         Fig 3: Identifying Integration Relay Connector Terminal

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

         Standard Resistance 

         RESISTANCE REFERENCE
         
         

         Tester Connection	Condition	Specified Condition
         Integration relay (1E-1) - Integration relay (1B-4)	Battery voltage is not applied between terminals 1B-3 and 1B-2	10 kΩ or higher
         Integration relay (1E-1) - Integration relay (1B-4)	Battery voltage is applied between terminals 1B-3 and 1B-2	Below 1 Ω

         If the resistance is not as specified, replace the integration relay.

   2. IG2 RELAY:
      1. Measure the resistance according to the value(s) in the table below.
         Fig 4: Identifying Integration Relay Connector Terminal

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

         Standard Resistance 

         RESISTANCE REFERENCE
         
         

         Tester Connection	Condition	Specified Condition
         Integration relay (1E-1) - Integration relay (1A-4)	Battery voltage is not applied between terminals 1A-2 and 1A-3	10 kΩ or higher
         Integration relay (1E-1) - Integration relay (1A-4)	Battery voltage is applied between terminals 1A-2 and 1A-3	Below 1 Ω

         If the resistance is not as specified, replace the integration relay.

   3. HORN RELAY:
      1. Measure the resistance according to the value(s) in the table below.

Fig 5: Identifying Integration Relay Connector Terminal

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance 

If the resistance is not as specified, replace the integration relay.