Front Shock Absorber With Coil Spring: Reassembly

INSTALL FRONT SHOCK ABSORBER BUSH
1. Using SST and a press, install a new absorber bush.
  SST 09710-22021 (09710-01071, 09710-01081)
  
  Fig 1: Identifying Absorber Bush
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT COIL SPRING
1. Using SST, compress the front coil spring.
  SST 09727-30021 (09727-00010, 09727-00031), 09727-00060
  
  NOTE: Do not use an impact wrench. It will damage SST.
  
  Fig 2: Identifying Front Coil Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the coil spring onto the shock absorber.
  HINT:
  
  Fit the lower end of the coil spring into the gap of the spring lower seat.
INSTALL FRONT SHOCK ABSORBER CUSHION RETAINER
INSTALL FRONT SUSPENSION SUPPORT SUBASSEMBLY
INSTALL FRONT SHOCK ABSORBER NO. 1 CUSHION
INSTALL FRONT SHOCK ABSORBER CUSHION RETAINER
INSTALL FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
1. Align the suspension support and the absorber bush as shown in the illustration.
2. Fit and tighten a new lock nut.
  Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
  
  NOTE: Do not use an impact wrench. It will damage the shock absorber rod.
3. Release the coil spring while checking the position of the suspension support.