Engine Coolant Temperature Sensor: Removal

REMOVE WINDSHIELD WIPER MOTOR AND LINK
HINT:

See the steps from "Remove front wiper arm and blade assembly LH" through "Remove windshield wiper motor and link" (See REMOVAL ).
SEPARATE EJECTOR TUBE (See REMOVAL )
REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 ENGINE UNDER COVER
DRAIN ENGINE COOLANT (See COOLANT )
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 VACUUM SWITCHING VALVE (See REMOVAL )
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER CASE (See REMOVAL )
REMOVE ENGINE COOLANT TEMPERATURE SENSOR
1. Disconnect the engine coolant temperature sensor connector.
  
  Fig 1: Locating Engine Coolant Temperature Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the engine coolant temperature sensor and gasket.