Active Control Engine Mount: Removal

REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE ENGINE UNDER COVER ASSEMBLY (See REMOVAL )
REMOVE NO. 1 ENGINE UNDER COVER (See REMOVAL )
DRAIN ENGINE COOLANT (See COOLANT )
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE BATTERY (See REMOVAL )
REMOVE NO. 2 AIR CLEANER INLET (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
DISCONNECT NO. 1 RADIATOR HOSE (See REMOVAL )
DISCONNECT NO. 2 RADIATOR HOSE (See REMOVAL )
DISCONNECT OIL COOLER HOSE (See REMOVAL )
DISCONNECT COOLING FAN ECU CONNECTOR (See REMOVAL )
REMOVE RADIATOR GRILLE (See REMOVAL )
REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) (See REMOVAL )
REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) (See REMOVAL )
REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY (See REMOVAL )
SEPARATE COOLER CONDENSER ASSEMBLY (See REMOVAL )
REMOVE RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR (See REMOVAL )
REMOVE TRANSVERSE ENGINE MOUNTING BRACKET
HINT:

Securely support the automatic transaxle using a jack.
1. Remove the nut, 3 bolts and the transverse engine mounting bracket.
  
  Fig 1: Locating Transverse Engine Mounting Bracket With Bolts And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY
1. Disconnect the vacuum hose sub-assembly from the air cleaner cap sub-assembly and vacuum switching valve.
  
  Fig 2: Locating Vacuum Hose Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 clamps.
  
  Fig 3: Locating Vacuum Hose Sub-Assembly Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the duty vacuum switching valve connector and clamp.
  
  Fig 4: Locating Duty Vacuum Switching Valve Connector And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the cap, 3 nuts and front engine mounting insulator assembly.