Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Exhaust side:
  1. Apply a coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
    
    Fig 1: Locating O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the camshaft timing oil control valve assembly with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 2: Locating Camshaft Timing Oil Control Valve Assembly Bolt (For Bank 2 Exhaust Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Intake side:
  1. Apply a coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
    
    Fig 3: Locating O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the camshaft tinning oil control valve assembly with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 4: Locating Camshaft Timing Oil Control Valve Assembly Bolt (For Bank 2 Intake Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Exhaust side:
  1. Apply a coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
    
    Fig 5: Locating O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the camshaft timing oil control valve assembly with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 6: Locating Camshaft Timing Oil Control Valve Assembly Bolt (Exhaust Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Intake side:
  1. Apply a coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
    
    Fig 7: Locating O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the camshaft timing oil control valve assembly with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 8: Locating Camshaft Timing Oil Control Valve Assembly Bolt (Intake Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HARNESS PROTECTOR
1. Connect the 2 studs [A].
  
  Fig 9: Locating Harness Protector Studs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 clamps [B].
3. Connect the 19 connectors [C].
4. Install the 5 bolts and nut [D].
  Torque: 8.3 N*m (84 kgf*cm, 73 in.*lbf)
TEMPORARILY INSTALL NO. 1 SURGE TANK STAY (See INSTALLATION )
TEMPORARILY INSTALL THROTTLE BODY BRACKET (See INSTALLATION )
INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See INSTALLATION )
FULLY TIGHTEN NO. 1 SURGE TANK STAY (See INSTALLATION )
FULLY TIGHTEN THROTTLE BODY BRACKET (See INSTALLATION )
CONNECT ENGINE ROOM MAIN WIRE (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR COOLANT LEAK (See COOLING SYSTEM )
INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (See INSTALLATION )
INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (See INSTALLATION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )
INSTALL ENGINE UNDER COVER ASSEMBLY (See INSTALLATION )