LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Highlander Base, 3.5 S, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FE) - System And Component Testing, Removal, Inspection And Installation >> Crankshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Inspection

  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TEMPERATURE SPECIFIED CONDITION CHART

      Temperature Specified Condition
      Cold 1630 to 2740 Ω
      Hot 2065 to 3225 Ω
      Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
      G04973877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • "Cold" and "Hot" mean the temperature of the coils themselves.
      • "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

      If the resistance is not as specified, replace the crankshaft position sensor.

scientia non olet · About LEMON Manuals