On-Vehicle Inspection

INSPECT NO. 1 IGNITION RELAY

Measure the resistance according to the value(s) in the table below.

Fig 1: No. 1 Ignition Relay Circuit

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Condition	Specified Condition
3 - 5	No battery voltage applied	10 kΩ or higher
3 - 5	Battery voltage applied to terminals 1 and 2	Below 1 Ω

If the result is not as specified, replace the relay.