VVT Sensor: Installation

INSTALL VVT SENSOR (for Bank 2)
1. Exhaust side:
  1. Install the VVT sensor with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 1: Locating Bolt On VVT Sensor (For Bank 2 Exhaust Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Intake side:
  1. Install the VVT sensor with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 2: Locating Bolt On VVT Sensor (For Bank 2 Intake Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 1)
1. Exhaust side:
  1. Install the VVT sensor with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 3: Locating VVT Sensor Bolt (Exhaust Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Intake side:
  1. Install the VVT sensor with the bolt.
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
    
    Fig 4: Locating VVT Sensor Bolt (Intake Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HARNESS PROTECTOR (See INSTALLATION )
TEMPORARILY INSTALL NO. 1 SURGE TANK STAY (See INSTALLATION )
TEMPORARILY INSTALL THROTTLE BODY BRACKET (See INSTALLATION )
INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See INSTALLATION )
FULLY TIGHTEN NO. 1 SURGE TANK STAY (See INSTALLATION )
FULLY TIGHTEN THROTTLE BODY BRACKET (See INSTALLATION )
CONNECT ENGINE ROOM MAIN WIRE (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR COOLANT LEAK (See COOLING SYSTEM )
INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (See INSTALLATION )
INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (See INSTALLATION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )
INSTALL ENGINE UNDER COVER ASSEMBLY (See INSTALLATION )