Active Control Engine Mount: Installation

INSTALL FRONT ENGINE MOUNTING INSULATOR ASSEMBLY
1. Install the front engine mounting insulator assembly with the 3 nuts and cap.
  Torque: 52 N*m (530 kgf*cm, 38 ft.*lbf)
  
  Fig 1: Locating Front Engine Mounting Insulator Assembly With Nuts And Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the duty vacuum switching valve connector and clamp.
  
  Fig 2: Locating Duty Vacuum Switching Valve Connector And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 clamps.
  
  Fig 3: Locating Vacuum Hose Sub-Assembly Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the vacuum hose sub-assembly to the air cleaner cap sub-assembly and vacuum switching valve.
  
  Fig 4: Locating Vacuum Hose Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSVERSE ENGINE MOUNTING BRACKET
1. Install the transverse engine mounting bracket with the 3 bolts and nut.
  Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf) for 3 Bolts
  
  87 N*m (887 kgf*cm, 64 ft.*lbf) for Nut
  
  Fig 5: Locating Transverse Engine Mounting Bracket With Bolts And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR (See INSTALLATION )
INSTALL COOLER CONDENSER ASSEMBLY (See INSTALLATION )
INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (See INSTALLATION )
INSTALL HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) (See INSTALLATION )
INSTALL HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) (See INSTALLATION )
INSTALL RADIATOR GRILLE (See INSTALLATION )
CONNECT COOLING FAN ECU CONNECTOR (See INSTALLATION )
CONNECT OIL COOLER HOSE (See INSTALLATION )
CONNECT NO. 2 RADIATOR HOSE (See INSTALLATION )
CONNECT NO. 1 RADIATOR HOSE (See INSTALLATION )
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL NO. 2 AIR CLEANER INLET (See INSTALLATION )
INSTALL BATTERY (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR COOLANT LEAK (See COOLING SYSTEM )
INSPECT AUTOMATIC TRANSAXLE FLUID
HINT:

See AUTOMATIC TRANSAXLE FLUID
INSPECT FOR OIL LEAK
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )
INSTALL ENGINE UNDER COVER ASSEMBLY (See INSTALLATION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )