DTC C2111/11 Transmitter ID1 Operation Stop; DTC C2112/12 Transmitter ID2 Operation Stop; DTC C2113/13 Transmitter ID3 Operation Stop; DTC C2114/14 Transmitter ID4 Operation Stop; DTC C2115/15 Transmitter ID5 Operation Stop: Description
The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures of the tires. The measured values are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the tire pressure warning ECU. The ECU compares the measured tire pressure values with the tire pressure threshold. When the measured tire pressure value is less than this threshold, the warning light in the combination meter turns on. The tire pressure warning ECU stores a DTC when the tire pressure warning valve and transmitter stops transmitting signals. The stored DTC is cleared when the signal transmission is resumed.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C2111/11 C2112/12 C2113/13 C2114/14 C2115/15 |
The tire pressure warning valve and transmitters stop transmitting signals. |
|
HINT:
It is necessary to perform the procedure to identify the tire pressure warning valve and transmitter that is malfunctioning because it cannot be identified by the output DTC.