DTC C1202/58 Brake Fluid Level Low / Open Circuit in Brake Fluid Level Warning Switch Circuit: Description
The brake fluid level warning switch sends the appropriate signal to the skid control ECU when the brake fluid level drops.
DTC DETECTION CONDITION AND TROUBLE AREA
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1202/58 |
When either of the following conditions is detected:
- The fluid level of the reservoir is LOW for 4 seconds, or 40 seconds after the engine switch is turned on (IG), or for 7 seconds during pump motor operation.
- With the ECU terminal IG1 voltage at 9.5 V to 17.0 V, an open in the brake fluid level warning switch circuit continues for 2 seconds or more.
|
- Brake fluid level
- Brake fluid level warning switch
- Harness or connector
- Master cylinder solenoid (Skid control ECU)
|