Freeze Frame Data

FREEZE FRAME DATA

Connect the Techstream to the DLC3.

Turn the engine switch on (IG) and check the freeze frame data by following the prompts on the Techstream screen.

Tilt & Telescopic

TILT & TELESCOPIC FREEZE FRAME DATA

Tester Display	Measurement Item/Range	Normal Condition
Tilt Position	Current tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Telesco Position	Current telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Tilt Return Position	Memorized tilt return position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Telesco Return Position	Memorized telescopic return position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Tilt Up Limit	Uppermost tilt position/Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
Tilt Up Limit Position	Uppermost tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Tilt Down Limit	Lowermost tilt position/Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
Tilt Down Limit Position	Lowermost tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Telesco Short Limit	Shortest telescopic position/Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
Telesco Short Limit Pos	Shortest telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Telesco Long Limit	Longest telescopic position/Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
Telesco Long Limit Pos	Longest telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges)	7000 to 9000 H (28672 to 36864 edges)
Tilt Up SW (CAN)	Input state of tilt up by manual switch / ON or OFF	ON: Tilt up is activated by manual switch OFF: Tilt up is not activated by manual switch
Tilt Down SW (CAN)	Input state of tilt down by manual switch/ON or OFF	ON: Tilt down is activated by manual switch OFF: Tilt down is not activated by manual switch
Telesco Short SW (CAN)	Input state of telescopic short by manual switch/ON or OFF	ON: Telescopic short is activated by manual switch OFF: Telescopic short is not activated by manual switch
Telesco Long SW (CAN)	Input state of telescopic long by manual switch/ON or OFF	ON: Telescopic long is activated by manual switch OFF: Telescopic long is not activated by manual switch
S/B Mem 1	Tilt and telescopic memory position 1/ Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
S/B Mem 2	Tilt and telescopic memory position 2/ Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
S/B Mem 3	Tilt and telescopic memory position 3/ Not Mem or Mem	Not Mem: Position is not memorized Mem: Position is memorized
T&T Autoaway Function	Auto away/return function/ON or OFF	ON: Auto away/return function is allowed OFF: Auto away/return function is prohibited
Power Source Voltage	Voltage data of power supply/min.: 0 V, max.: 20 V	Actual power supply voltage 11 to 14 V
Freeze Speed Info	Vehicle speed data/min.: 0 km/h (0 mph), max.: 255 km/h (158 mph)	Actual vehicle speed
IG SW (CAN)	Communication state of engine switch/ ON or OFF	ON: Communication is normal OFF: Communication is interrupted
Key Code Confirm(CAN)	Communication state of key code confirmation signal/ON or OFF	ON: Communication is normal OFF: Communication is interrupted
The Number of DTCs	Number of diagnostic trouble codes / min.: 0, max.: 255	Actual number of diagnostic trouble codes