Stabilizer Control Valve: Reassembly

INSTALL STABILIZER CONTROL ADAPTER SHUTTER VALVE (for Lower Chamber Side)
1. Apply a small amount of suspension fluid to a new O-ring and install it to the shutter valve.
2. Install the shutter valve to the adapter housing.
  Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
INSTALL STABILIZER CONTROL ADAPTER SHUTTER VALVE (for Upper Chamber Side)
HINT:

Use the same procedures described for the lower chamber side.

Fig 1: Identifying Stabilizer Control Adapter Shutter Valve (Lower Chamber Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL OIL NOZZLE VALVE SUB-ASSEMBLY (for Lower Chamber Side)
1. Before installing the oil nozzle valve, apply suspension fluid to the oil nozzle valve O-ring.
2. Install the oil nozzle valve to the adapter housing.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
INSTALL OIL NOZZLE VALVE SUB-ASSEMBLY (for Upper Chamber Side)
HINT:

Use the same procedures described for the lower chamber side.

Fig 2: Identifying Oil Nozzle Valve
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SERVICE VALVE CAP (for Lower Chamber Side)
1. Install the valve cap to the oil nozzle valve.
  Torque: 0.6 N*m (6.0 kgf*cm, 5.0 in.*lbf)
INSTALL SERVICE VALVE CAP (for Upper Chamber Side)
HINT:

Use the same procedures described for the lower chamber side.

Fig 3: Identifying Service Valve Cap
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002