LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis >> Transmission >> Transfer Case -JF2A >> 4WD Control Ecu >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

4WD Control Ecu: Installation

  1. INSTALL 4WD CONTROL ECU 
    1. Install the ECU with the bolt.

      Torque: 13 N*m (127 kgf*cm, 9 ft.*lbf) 

    2. Connect the 2 ECU connectors.
    Fig 1: Identifying ECU Connector With Bolt
    G05629742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB  (See INSTALLATION )
  4. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See INSTALLATION )
  5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  6. INSTALL COWL SIDE TRIM BOARD RH  (See INSTALLATION )
  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL FRONT DOOR SCUFF PLATE RH  (See INSTALLATION )
  9. INSTALL LOWER INSTRUMENT PANEL PAD SUBASSEMBLY RH  (See INSTALLATION )
  10. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION  (See INSTALLATION )
scientia non olet · About LEMON Manuals