Service Data

SPECIFICATIONS: ALIGNMENT / HANDLING DIAGNOSIS: SERVICE DATA

SERVICE DATA

Vehicle Height (Unloaded Vehicle)





HINT: * for Mexico vehicle height, B and C points are 15 mm (0.591 in.) higher than standard vehicle.

Measuring points (for Torsion Type Suspension):
- A: Ground clearance of front wheel center
- B: Ground clearance of lower suspension arm No. 1 bush front bolt center
- C: Ground clearance of axle beam set bolt center
- D: Ground clearance of rear wheel center

Measuring points (for Double Wishbone Type Suspension):
- A: Ground clearance of front wheel center
- B: Ground clearance of lower suspension arm No. 1 bush front bolt center
- C: Ground clearance of No. 1 lower suspension arm bushing set bolt center
- D: Ground clearance of rear wheel center

Wheel Angle (Unloaded Vehicle)





Camber Inclination (Unloaded Vehicle)





Caster Inclination (Unloaded Vehicle)





Steering Axis Inclination (Unloaded Vehicle)





Toe-in (Unloaded Vehicle)