April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

NOTE:

This code may be output even if there is no malfunction.
If this code is output frequently, replace the navigation receiver assembly.

CLEAR DTC
1. Clear the DTCs (See DTC CHECK / CLEAR ).
RECHECK FOR DTC
1. Recheck for DTCs and check if the same trouble occurs again.
  OK: Malfunction disappears .
  
  NG: REPLACE NAVIGATION RECEIVER ASSEMBLY (See REMOVAL )
  
  OK: END