DTC P2118 Throttle Actuator Control Motor Current Range / Performance: Description
WARNING: This page is about a different variant/trim than selected.
The electronic throttle control system has a dedicated power supply circuit. The voltage (+BM) is monitored and when it is low (less than 4 V), the ECM determines that there is a malfunction in the electronic throttle control system and cuts off the current to the throttle actuator.
When the voltage becomes unstable, the electronic throttle control system itself becomes unstable. For this reason, when the voltage is low, the current to the throttle actuator is cut. If repairs are made and the system returns to normal, turn the ignition switch off. On the next restart, the ECM will allow the current to flow to the throttle actuator.
HINT:
The electronic throttle control system does not use a throttle cable.
DTC DETECTION CONDITION CHART
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P2118 | Open in electronic throttle control system power source (+BM) circuit (1 trip detection logic) |
|