Back Door Lock: Installation

INSTALL BACK DOOR LOCK ASSEMBLY
1. Install the back door lock assembly with the 3 bolts.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  Fig 1: Identifying Back Door Lock Assembly With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
  
  Fig 2: Locating Back Door Lock Control Cable Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the rod as shown in the illustration.
  
  Fig 3: Connecting Rod
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the back door lock control cable sub-assembly.
  
  Fig 4: Identifying Back Door Lock Control Cable Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BACK DOOR TRIM BOARD ASSEMBLY (See REASSEMBLY )
INSTALL BACK DOOR SIDE GARNISH LH (See REASSEMBLY )
INSTALL BACK DOOR SIDE GARNISH RH (See REASSEMBLY )
INSTALL BACK DOOR CENTER GARNISH (See REASSEMBLY )