LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System (2ZR-FE) >> Fuel Sender Gauge Assembly >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sender Gauge Assembly: Inspection

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY 
    1. Remove the fuel sender gauge assembly.
    2. Check that the float moves smoothly between F and E.
    3. Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

      Standard Resistance 

      STANDARD RESISTANCE

      Float Level Specified Condition
      F 13.5 to 16.5
      Between E and F 13.5 to 414.5 (Gradually changes)
      E 405.5 to 414.5

      If the value is not as specified, replace the fuel sender gauge assembly.

      Fig 1: Identifying Fuel Sender Gauge Connector Terminals
      G06009824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals