DTC Check / Clear
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Connect Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester on.
- Enter the following menus: Body Electrical / Immobilizer or Engine / Trouble Codes.
- Check the details of the DTC (s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
- CLEAR DTC
- Connect Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester on.
- Enter the following menus: Body Electrical / Immobilizer or Engine / Trouble Codes.
- Erase the DTCs.