Throttle Body: Inspection: Inspection

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY

Measure the resistance between the terminals.

Fig 1: Measuring Resistance between Throttle Body Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Resistance

Tester Connection	Condition	Specified Condition
2 (M+) - 1 (M-)	20°C (68°F)	0.3 to 100 Ω
5 (VC) - 3 (E2)	20°C (68°F)	1.2 to 3.2 kΩ

If the result is not as specified, replace the throttle body assembly.