April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Oil Control Valve: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.
  
  Fig 1: Identifying O-Ring Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve assembly with the bolt.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
3. Connect the camshaft timing oil control valve connector.
  
  Fig 2: Locating Camshaft Timing Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the vacuum hose clamp with the bolt.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
INSPECT FOR OIL LEAK
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 3: Locating Vacuum Hose Clamp Bolt

G05386894

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002