Service Data
PROPELLER SHAFT
PROPELLER SHAFT - SERVICE DATA
| Inter mediate shaft runout | Maximum runout: 0.4 mm (0.0157 in.) | |
| Front side | Maximum runout: 0.1 mm (0.00394 in.) | |
| Rear side (vertical direction) | Maximum runout: 0.1 mm (0.00394 in.) | |
| Rear side (horizontal direction) | Maximum runout: 0.1 mm (0.00394 in.) | |
| propeller shaft runout | Maximum runout: 0.4 mm (0.0157 in.) | |
| Rear propeller shaft runout | Maximum runout: 0.4 mm (0.0157 in.) |
PROPELLER SHAFT
PROPELLER SHAFT - SERVICE DATA
| Joint angle | No. 2 joint angle (A) - (B) | -1.74° to +0.26° |
| No. 4 joint angle (C) - (D) | 0.20° to 2.20° |
PROPELLER SHAFT
PROPELLER SHAFT - SERVICE DATA
| PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY | dimension (between the rear side of the cover and shaft) | 65.5 to 70.5 mm (2.579 to 2.776 in.) |
| dimensions (between the edge surface of the center support bearing and the edge surface of the cushion respectively) | 11.5 to 13.5 mm (0.453 to 0.532 in.) |
PROPELLER SHAFT
PROPELLER SHAFT - SERVICE DATA
| Adjusting washer Thickness mm (in.) | 3.2 (0.126) |
| 4.5 (0.177) | |
| 6.5 (0.256) | |
| 9.0 (0.354) |