U250E Automatic Transmission / Transaxle - Torque Specifications
U250E AUTOMATIC TRANSMISSION / TRANSAXLE - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Speed sensor NC sensor x Automatic transaxle | 8.8 | 90 | 78 in.*lbf | |
| Speed sensor NT sensor x Automatic transaxle | 11 | 112 | 8 | |
| Drain plug x Oil pan | 49 | 500 | 36 | |
| Transmission wire x Transaxle housing | 5.4 | 55 | 48 in.*lbf | |
| ATF temperature sensor x Valve body | 6.6 | 67 | 58 in.*lbf | |
| Oil pan x Transaxle | 7.8 | 80 | 69 in.*lbf | |
| Valve body x Transaxle | 11 | 110 | 8 | |
| Oil strainer x Valve body | 11 | 110 | 8 | |
| Shift solenoid valve SL1 x Transmission valve body assembly | 6.6 | 67 | 58 in.*lbf | |
| Shift solenoid valve SL2 x Transmission valve body assembly | 11 | 112 | 8 | |
| Shift solenoid valve DSL x Transmission valve body assembly | 11 | 112 | 8 | |
| Shift solenoid valve SR and S4 x Transmission valve body assembly | 11 | 112 | 8 | |
| Shift solenoid valve SL3 and SLT x Transmission valve body assembly | 6.6 | 67 | 58 in.*lbf | |
| Park/neutral position switch | Bolt | 5.4 | 55 | 48 in.*lbf |
| Nut | 6.9 | 70 | 61 in.*lbf | |
| Control shaft lever x Control shaft | 13 | 130 | 9 | |
| Shift control cable x Control shaft lever | 12 | 122 | 9 | |
| Shift lever assembly x Body | 12 | 122 | 9 | |
| Transmission control cable assembly x Body | 5.0 | 51 | 44 in.*lbf | |
| Transmission control cable bracket x Body | 5.0 | 51 | 44 in.*lbf | |
| Front No. 1 floor heat insulator x Body | 5.5 | 56 | 49 in.*lbf | |
| Wire harness clamp bracket x Automatic transaxle | 13 | 132 | 10 | |
| Upper transaxle case cover x Automatic transaxle | 12 | 122 | 9 | |
| Speedometer driven hole cover x Automatic transaxle | 5.5 | 56 | 49 in.*lbf | |
| Oil cooler tube x Automatic transaxle | 12 | 122 | 9 | |
| Transmission oil filler tube sub-assembly x Automatic transaxle | 5.5 | 56 | 49 in.*lbf | |
| No. 1 transmission control cable bracket x Automatic transaxle | 12 | 122 | 9 | |
| Engine mounting bracket LH x Automatic transaxle | 52 | 530 | 38 | |
| Rear engine mounting bracket x Automatic transaxle | 45 | 459 | 33 | |
| Front engine mounting bracket x Automatic transaxle | 64 | 652 | 47 | |
| Transaxle housing x Engine | Bolt A | 64 | 652 | 47 |
| Bolt B | 46 | 469 | 34 | |
| Bolt C | 46 | 469 | 34 | |
| Bolt D | 44 | 448 | 32 | |
| Engine mounting insulator LH x Engine mounting bracket LH | 56 | 571 | 41 | |
| Torque converter clutch x Drive plate | 41 | 418 | 30 | |
| Transmission control cable support x Automatic transaxle | 12 | 122 | 9 | |
| Hood sub-assembly x Body | 13 | 133 | 10 | |
| Front planetary gear lock nut | 185 to 350 | 1886 to 3569 | 136 to 258 | |
| Brake apply tube clamp x Transaxle case | 5.4 | 55 | 48 in.*lbf | |
| No. 1 Transaxle case plug x Transaxle rear cover | 7.4 | 75 | 65 in.*lbf | |
| No. 1 Transaxle case plug x Transaxle case | 7.4 | 75 | 65 in.*lbf | |
| Transaxle rear cover x Transaxle case | Bolt A | 19 | 190 | 14 |
| Other bolt | 25 | 250 | 18 | |
| Pawl shaft clamp x Transaxle case | 9.8 | 100 | 87 in.*lbf | |
| Oil pump assembly x Transaxle case | 22 | 225 | 16 | |
| Transaxle housing x Transaxle case | Bolt A | 29 | 296 | 21 |
| Bolt B | 29 | 296 | 21 | |
| Bolt C | 22 | 225 | 16 | |
| Bolt D | 10 | 102 | 7 | |
| Bolt E | 33 | 336 | 24 | |
| Bolt F | 25 | 255 | 18 | |
| Parking lock pawl bracket x Transaxle case | 20 | 205 | 15 | |
| Manual detent spring x Transaxle case | Bolt A | 20 | 205 | 15 |
| Bolt B | 12 | 120 | 9 | |
| Oil cooler tube union (Outlet oil cooler union) x Transaxle case | 27 | 275 | 20 | |
| Oil cooler tube elbow (Inlet oil cooler elbow) x Transaxle case | 27 | 275 | 20 | |
| Oil pump body x Stator shaft assembly | 9.8 | 100 | 87 in.*lbf | |
| Differential gear lube apply tube and No. 1 transaxle apply tube clamp x Transaxle housing | 9.8 | 100 | 87 in.*lbf | |
| Front differential case x Front differential ring gear | 95 | 970 | 70 | |
| Front planetary gear nut | 280 | 2855 | 207 | |