Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK NAVIGATION RECEIVER ASSEMBLY 
   1. Check if a disc can be inserted or ejected normally.

      OK: A disc can be inserted or ejected normally  .

      NG: REPLACE NAVIGATION RECEIVER ASSEMBLY  (See REMOVAL  )

      OK: Go to Next Step 

2. DTC CLEAR AND RECHECK 
   1. Clear the DTCs (See DTC CHECK / CLEAR  ).
   2. Recheck for DTCs and check if the same trouble occurs again.

      OK: Malfunction disappears  .

      NG: REPLACE NAVIGATION RECEIVER ASSEMBLY  (See REMOVAL  )

      OK: END