Steering Pad Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See AIRBAG SYSTEM ).
REMOVE LOWER NO. 3 STEERING WHEEL COVER (See REMOVAL )
REMOVE LOWER NO. 2 STEERING WHEEL COVER (See REMOVAL )
REMOVE STEERING PAD (See REMOVAL )
REMOVE STEERING PAD SWITCH LH
1. Disconnect the pad switch connector from the spiral cable.
2. Disengage the clamp.
  
  Fig 1: Identifying Pad Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the screw.
4. Disengage the 2 pins and remove the steering pad switch LH.
  
  Fig 2: Locating Steering Pad Switch LH And Pins
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEERING PAD SWITCH ASSEMBLY
1. Disconnect the pad switch connector from the spiral cable.
2. Disengage the clamp.
  
  Fig 3: Locating Pad Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the screw.
4. Disengage the 2 pins and remove the steering pad switch.
  
  Fig 4: Locating Steering Pad Switch Pins And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Disengage the clamp.
  
  Fig 5: Identifying Steering Pad Switch Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the screw.
7. Disengage the 2 pins and remove the steering pad switch assembly.
  
  Fig 6: Locating Steering Pad Switch Pins And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002