Inspection Procedure
- CHECK DISPLAY SETTING
- Check that the display is not in "Screen OFF" mode.
OK: The display setting is not in "Screen OFF" mode .
NG: CHANGE SCREEN TO "SCREEN ON" MODE
OK: Go to Next Step
- Check that the display is not in "Screen OFF" mode.
- CHECK IMAGE QUALITY SETTING
- Check that the screen color quality can be set.
OK: Setting is possible .
NG: Go to step 3
OK: PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL
- Check that the screen color quality can be set.
- CHECK CABIN
- Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
HINT:
- A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.
- The appropriate cabin temperature is 20 to 30°C (68 to 86°F).
OK: Condensation is not likely and temperature is not high or extremely low .
NG: SET CABIN TO APPROPRIATE TEMPERATURE
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
- Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.