Inspection Procedure

CHECK CONDITION
1. Check with the customer if the vehicle has been turned by a turntable.
  
  Fig 1: Checking With Customer If Vehicle Has Been Turned By Turntable
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  OK: Vehicle has not been turned by a turntable .
  
  HINT:
  
  If the vehicle is turned on a turntable with the ignition switch ON, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.
  
  NG: TURN IGNITION SWITCH TO ON WHEN VEHICLE IS COMPLETELY STOPPED
  
  OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )