LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2ZR-FE) >> Crankshaft Position Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Crankshaft Position Sensor: Removal

  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
    2. Remove the bolt and crank position sensor.
      Fig 1: Locating Bolt And Crank Position Sensor
      G05398770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals