Camshaft Position Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.

INSPECT CAMSHAFT POSITION SENSOR

Measure the resistance.

Fig 1: Inspecting Camshaft Position Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

RESISTANCE REFERENCE

Tester Connection	Condition	Specified Condition
1 - 2	Cold	835 to 1400 Ω
1 - 2	Hot	1060 to 1645 Ω

HINT:

In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the camshaft position sensor.