LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Matrix Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (2AZ-FE)) >> SFI System >> DTC P0111 Intake Air Temperature Sensor Gradient Too High >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
    5. Read DTCs.

    Result 

    RESULT REFERENCE

    Result Proceed to
    P0111 and other DTCs A
    P0111 B

    HINT:

    If any DTCs other than P0111 are output, troubleshoot those DTCs first.

    B: REPLACE MASS AIR FLOW METER  (See MASS AIR FLOW METER )

    A: GO TO DTC CHART  (See DIAGNOSTIC TROUBLE CODE CHART )

scientia non olet · About LEMON Manuals