MF1A Transfer / 4WD / AWD - Torque Specifications
MF1A TRANSFER / 4WD / AWD - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft*lbf |
|---|---|---|---|
| Driven pinion gear nut (with SST) | 279 | 2845 | 205 |
| Driven pinion gear nut (without SST) | 295 | 3008 | 217 |
| Ring gear x Transfer ring gear mounting case | 78 | 790 | 57 |
| Bearing cap set bolt | 63 | 644 | 47 |
| Transfer extension housing sub-assembly x Transfer case | 26 | 260 | 19 |
| Transfer extension housing sub-assembly x Transfer dynamic damper | 26 | 260 | 19 |
| Breather oil deflector set bolt | 6.5 | 66 | 58 in.*lbf |
| No. 1 transfer case cover x Transfer case | 20 | 200 | 14 |
| Transfer drain plug x Transfer assembly | 49 | 500 | 36 |
| No. 1 transfer case plug x Transfer assembly | 49 | 500 | 36 |
| No. 2 transfer case plug x Transfer assembly | 49 | 500 | 36 |
| Transfer and transaxle setting stud bolt x Transfer assembly | 39 | 400 | 29 |
| Transfer assembly x Transaxle assembly | 69 | 700 | 51 |
| Transfer assembly x Transfer stiffener plate RH | 34 | 347 | 25 |
| 4WD control ECU set bolt | 8.0 | 82 | 71 in.*lbf |
| Front exhaust pipe assembly x Exhaust manifold converter sub-assembly | 43 | 440 | 32 |
| Front exhaust pipe assembly x Center exhaust pipe assembly | 43 | 440 | 32 |