Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs are not present | P0115 - P0118 (Engine coolant temperature sensor) P0120 - P0223, P2135 (Throttle position sensor) P0125 (Insufficient Engine coolant temperature for closed loop) P0335 (Crankshaft position sensor) P0340 (Camshaft position sensor) |
| Throttle position (Throttle position sensor voltage) | 0.24 to 2 V |
| Time after engine starts | 5 seconds |
| Battery voltage | 10.5V or more |
| Estimated Load | 30 to 70 % |
| Engine coolant temperature | 70°C (158°F) or more |
| Intake air temperature sensor circuit | OK |
| Engine coolant temperature sensor circuit | OK |
| Crankshaft position sensor circuit | OK |
| Throttle position sensor circuit | OK |
| Canister pressure sensor circuit | OK |
| EVAP leak detection pump | OK |
| EVAP vent valve | OK |